How to Change Polaris Sportsman 110 Transmission Fluid

Changing the transmission fluid in a Polaris Sportsman 110 is an easy, yet often overlooked routine maintenance task essential to the health of the ATV’s drivetrain.

Watch the video above and follow the steps below to change the transmission fluid in a Polaris Sportsman 110.

Tools and Supplies Needed - Polaris Sportsman 110 Transmission Fluid Change

Tools

  • 3/8th ratchet
  • 14mm socket
  • Funnel
  • Torque wrench

Polaris Sportsman 110 transmission fluid change

Changing the Transmission Fluid on a Polaris Sportsman 110

Step 1. Remove the fill plug to make it easier for the transmission fluid to drain. 

Polaris Sportsman 110 transmission oil change

Step 2. Use a 14mm socket to remove the drain bolt. 

Polaris Sportsman 110 ATV transmission fluid change

NOTE: Make sure the crush washer that comes out with the bolt isn’t damaged. If it is, replace it with a new one to prevent leaks. 

Step 3. Replace the drain bolt and torque it to 14 foot-pounds. 

Polaris Sportsman 110 transmission fluid drain bolt

Step 4. Refill the transmission with AGL gearcase lube until the fluid begins to flow back out of the opening. The Polaris Sportsman 110 takes about 11.8 ounces to fill.

Polaris Sportsman 110 AGL fluid change

Polaris Sportsman 110 diff fluid change

Step 5. Replace the fill cap, then clean up the overflow-affected area with some contact cleaner and you’re done.

Polaris Sportsman diff fluid change fill cap

Ready to change out the engine oil in your Polaris ATV next? Watch the video below to see how to change the oil in a Polaris Sportsman 110.

 

body

Why Partzilla?

Commercial Discounts

Special discounts for companies in the powersports industry

Details

Government Sales

Discounts for federal and most state and municipal agencies

Details