Why Adjust Your Motorcycle’s Chain
Drive chain adjustments are essential to the performance of any motorcycle or dirt bike. Adjusting the chain on a motorcycle is the do-it-yourself kind of maintenance job that should never be overlooked.
An incorrectly adjusted chain prevents the motorcycle’s rear suspension from performing at its best, and can quickly wear out components. Motorcycles are designed to have a certain amount of play in their chains. However, chains gradually stretch over time, which alters the amount of play to the point where it requires an adjustment.
Watch the video below to see how to set chain slack using Motion Pro's Chain Slacksetter tool.
You should check and adjust a street motorcycle’s chain at minimum after every 500 miles of use, and even more often on performance and dirt bikes. Adjusting a motorcycle’s chain is done by loosening the rear axle, and tightening or loosening the two axle adjustment bolts on the rear swingarm.
There’s a measuring scale next to the adjustment bolts, and when they reach the maximum adjustment, the chain needs to be replaced.
Watch the video below to see how to adjust and clean the chain on a Kawasaki dirt bike.
When replacing motorcycle chains, always change out the front and rear sprockets as well. This is because all three components wear together. In other words, worn out sprockets rapidly wear out a new chain, which will then require yet another replacement, so it’s best to change them all at the same time.
Watch the video below to see how to change the chain and sprockets on a Suzuki motorcycle.
Other Reasons to Adjust or Replace a Motorcycle Chain
When the chain is too tight, the additional resistance and friction reduces the amount of power getting from the engine (drive sprocket) to the rear wheel (driven sprocket), hindering the bike’s performance. Additionally, if the chain is too tight, it could end up snapping and cause a motorcycle accident.
If the chain is too loose, the bike will experience chain slap, where the chain makes contact with the swingarm and does damage to both. The chain can also jump off a sprocket and cause an accident if it’s too loose.
An important part of replacing a motorcycle chain is knowing how to measure one. Watch the video above to learn how to measure motorcycle and ATV drive chains.