25WH-ACCUTRONIX-BL01-IC Diamond LED Bag Lights - Chrome - Red LEDs25WH-ACCUTRONIX-BL01-IC Diamond LED Bag Lights - Chrome - Red LEDs
  • 25WH-ACCUTRONIX-BL01-IC Diamond LED Bag Lights - Chrome - Red LEDs
  • 25WH-ACCUTRONIX-BL01-IC Diamond LED Bag Lights - Chrome - Red LEDs

Diamond LED Bag Lights - Chrome - Red LEDs

BL01-IC

by Accutronix

$188.95 20% OFF

$151.99
In Stock · Only 2 left in stock
Ships in 9 to 13 days · Displaying availability for
Choose A Location
- +

Description

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface.

They are a great solution for adding rear lights to custom baggers.

The LED unit is a 3-wire light & can be used as a running, turn and/or brake light.

A load equalizer or turn signal controller may be needed for your application.

The billet housing is 8-3/8in. Long & 1-1/2in. Wide.

The LED unit has 10 LEDs & is 5-1/4in. Long & in. Wide. Approximately in. of clearance is needed behind the surface.

Machined from 6061 T6 billet aluminum. They are available in a chrome plated finish or our Night Series, brilliantly Black Anodized, then areas

are machined again for a contrast of a black anodized & a raw aluminum finish.

Sold in pairs.

7-3/4in.L x 1-9/16in.W

NOTE: May require load equalizer or turn signal controller depending upon application

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface..They are a great solution for adding rear lights to custom baggers..The LED unit is a 3-wire light & can be used as a running, turn and/or brake light..A load equalizer or turn signal controller may be needed for your application..The billet housing is 8-3/8in. Long & 1-1/2in. Wide..The LED unit has 10 LEDs & is 5-1/4in. Long & in. Wide. Approximately in. of clearance is needed behind the surface..Machined from 6061 T6 billet aluminum. They are available in a chrome plated finish or our Night Series, brilliantly Black Anodized, then areas.are machined again for a contrast of a black anodized & a raw aluminum finish..Sold in pairs. 7-3/4in.L x 1-9/16in.W.NOTE: May require load equalizer or turn signal controller depending upon application

These LED turn signals fit nicely between the saddlebag & fender on a custom FLH or on any flat surface..They are a great solution for adding rear lights to custom baggers..The LED unit is a 3-wire light & can be used as a running, turn and/or brake light..A load equalizer or turn signal controller may be needed for your application..The billet housing is 8-3/8in. Long & 1-1/2in. Wide..The LED unit has 10 LEDs & is 5-1/4in. Long & in. Wide. Approximately in. of clearance is needed behind the surface..Machined from 6061 T6 billet aluminum. They are available in a chrome plated finish or our Night Series, brilliantly Black Anodized, then areas.are machined again for a contrast of a black anodized & a raw aluminum finish..Sold in pairs.

LIGHT BAG DIA CHR/RED LED

Details

  • Brand: Accutronix
  • Manufacturer Item Number: BL01-IC
  • Distributor Part Number: 20401745, 81120014