How to Change Kawasaki Ninja ZX10R Oil

Got nothing to do on a rainy day? Change the oil in your Kawasaki motorcycle. It only takes a handful of minutes and can easily be done with a few basic tools.

Watch the video above and follow the steps below to learn how to change the oil in a Kawasaki Ninja ZX10R.

Tools and Parts – Kawasaki Ninja Oil Change

  • 3/8th ratchet
  • 18mm socket
  • Oil filter wrench

Kawasaki 10W-40 motorcycle oil

Kawasaki motorcycle oil filter

Kawasaki Ninja ZX10R Oil Change Service

Step 1. Run the motorcycle's engine for a couple of minutes to circulate the oil.

2006 Kawasaki Ninja ZX10R motorcycle engine oil change service

PRO TIP: You don’t need to bring the engine all the way up to temperature, but circulating the oil makes it easier to drain.

Step 2. Remove the oil fill cap to allow the engine to breathe properly while it’s draining. 

2006 Kawasaki Ninja ZX10R motorcycle engine oil change

Step 3. Drain the used oil into a drain pan. 

2006 Kawasaki Ninja ZX10R motorcycle oil change service

NOTE: The 18mm drain bolt is located underneath the unit. Don’t lose the crush washer on the drain bolt. 

2006 Kawasaki Ninja ZX10R engine oil change service

Step 4. Replace the drain bolt and its crush washer once the oil has drained. Use a torque wrench to tighten the bolt to 15 foot-pounds.

2006 Kawasaki Ninja ZX10R engine oil change

2006 Kawasaki Ninja ZX10R oil change

Step 5. Use an oil filter wrench to remove the old oil filter. 

Kawasaki Ninja ZX10R motorcycle engine oil change service

NOTE: Use our Kawasaki Ninja oil pump and filter diagram for reference if you need help finding the oil filter. 

Step 6. Install the new oil filter,and use a torque wrench with the oil filter wrench to tighten it to 13 foot-pounds. 

Kawasaki Ninja ZX10R motorcycle engine oil change

PRO TIP: Spread a little of the old oil around the O-ring on the oil filter before screwing it in to make it easier to remove next time.   

Kawasaki Ninja ZX10R engine oil change service

Kawasaki Ninja ZX10R oil change service

Step 7. Fill the engine with 3.9 quarts of Kawasaki 10W40 motorcycle oil.  

Kawasaki Ninja ZX10R oil change

Step 8. Replace the fill cap, then start the engine up for a minute to circulate the oil around the engine before you check the oil level.

Kawasaki Ninja ZX10R motorcycle oil change

Step 9. Check the sight glass to make sure the oil level is good, then top off the oil if necessary and you're done.  

Kawasaki Ninja ZX10R motorcycle oil change service

The steps for changing the oil on a Kawasaki motorcycle are the same or similar for all models. However, if you want see at an oil change for a different model, watch the video below to see how to change the oil in a Kawasaki Z125.

 

body

Why Partzilla?

Commercial Discounts

Special discounts for companies in the powersports industry

Details

Government Sales

Discounts for federal and most state and municipal agencies

Details