How to Change Honda Foreman 500 Oil

When a Honda ATV is due for an oil change service, doing it yourself is pretty straightforward. Watch the video or follow the steps below to change the oil in a Honda Foreman 500 ATV.

Tools and Supplies – Honda Foreman 500 Oil Change

  • Ratchet
  • 8mm, 17mm sockets
  • Torque wrench
  • Funnel

Honda GN4 10W-30 engine oil

Buy Honda ATV oil filter

How to Change Honda Foreman 500 Engine Oil

Step 1. Run the motor on idle for a minute to warm the oil, then remove the access panel cover from the left side panel, and remove the dipstick to help the oil drain faster.

2017 Honda Foreman 500 ATV engine oil change service

2017 Honda Foreman 500 ATV engine oil change

Step 2. Position a drain pan under the engine, then remove the 17mm drain bolt and crush washer from the bottom of the engine. Inspect the crush washer for wear, and replace it if necessary.

2017 Honda Foreman 500 ATV oil change service

Honda Foreman 500 ATV engine oil change service

Step 3. Let the old oil drain out, then reinstall the crush washer and drain bolt, and torque the bolt to 18 foot-pounds.

Honda Foreman 500 ATV engine oil change

Step 4. Remove the seat and the right-side fairing to access the oil filter.

Honda Foreman 500 ATV oil change service

Honda Foreman 500 ATV oil change service

Honda Foreman 500 ATV engine oil change

Step 5. Remove the three 8mm bolts and the oil filter cover. Next, remove the old oil filter and install the new filter. 

Honda Foreman 500 ATV oil change

Honda Foreman 500 engine oil change service

NOTE: Make sure the spring behind the oil filter is still in place.

Honda Foreman 500 oil change service

Step 6. Install the new oil filter, then inspect the O-ring around the oil filter cover and replace it if necessary. Reinstall the oil filter cover, tighten the bolts to 7 foot-pounds, and spray off any excess oil on the cover. 

Honda Foreman 500 engine oil change

Honda Foreman 500 oil change

Step 7. Reinstall the right-side fairing and the seat, then use a funnel to refill the engine with 3.2 quarts of Honda GN4 10W-30 oil

Honda Foreman ATV engine oil change service

Step 8. Reinstall the dipstick, then idle the motor for about 15 seconds to circulate the new oil throughout the engine. Next, shut off the motor and let the oil stand for a minute.

Honda Foreman ATV oil change service

Honda Foreman ATV engine oil change

Step 9. Remove the dipstick, wipe it clean, then set it back into the crankcase without threading it back in. Remove the dipstick again and check the oil level. Top off the oil level if necessary, then reinstall the dipstick and the access panel cover and you’re done.

Honda Foreman ATV oil change

The steps for a Honda ATV oil service are the same or similar across all models. However, if you want a more in-depth look at an oil change for a Honda quad, watch the video below to see how to change the oil and filter in a Honda TRX400

 

body

Why Partzilla?

Commercial Discounts

Special discounts for companies in the powersports industry

Details

Government Sales

Discounts for federal and most state and municipal agencies

Details